The Purpose of using Using SMS Robot And Its Specification
The primary benefit is
the faster operational speed. In SMS
robot control, you must send one SMS for each motion. However,
numerous motions can be performed in a single call. Another advantages of
call-based control is that it is less expensive than SMS-based control: This
project makes use of mobile devices, and because mobile has a very long range,
so does the project. Furthermore, it is determined by the cell network's
coverage.
Process
to control Robots with SMS :
Consider a voice that
is so realistic that you can't distinguish whether it is a human voice or an
algorithm from the future. The transitions are seamless, the inflections are
genuine, and the voice is cheerful, reasonable, or serious your pick. Imagine
being able to choose among these voices and personalities in the same way you
would a regular audio professional. Happy news: text-to-speech technology has
here, and it is all of these features and more.
Text-to-speech (TTS)
technology reads computer text vocally. Text-to-speech technology can convert
words on a computing device into living person sounds with the push of a
button. As artificial intelligence advances, the capabilities of voice
synthesis become more acceptable (and appealing) to creative professionals
As a result, it may
control the relay. The relay terminals are attached to DC Motors, which will
drive the robot based on the instructions received.
For example, if you
would like to move the robot ahead, you must send SMS to the modem that is
attached to the SMS robot.
After obtaining the SMS, the modem sends the relevant signals to the
microprocessor through the data connection and level converter. The
microprocessor then triggers the associated relay, causing the robot to move
ahead. Alternatively, we can tell the robot to change the policy on both the
left and right sides.The data cable is the connection that connects a cellular
phone to a microcontroller. We can transmit and receive orders to and from the
cell phone via a data connection. The output of the mobile phone signals is
sent into the level converter, which converts the signals into 0 and 5 volt
pulses, which are then fed into the microcontroller.
We must configure the
microcontroller to receive the input signal from the mobile phone via the data
wire, and the microcontroller will activate the relay via the relay driver
circuit, which comprises transistors that operate as switches.
Cell phones are now
widely used; they are more than just a means of communication with humans. It
is quite beneficial for communicating with and commanding the machine. One of
them is this project.
The goal of this
project is to use a mobile phone to manage and operate a robot using the short
messenger service (SMS) approach. However SMS robot, instead of a cell phone, we are
employing a GSM modem.
This project includes a
robot gathering, a microprocessor, a GSM modem, a data cable, a level
converters, a relay device, and traction control. The microcontroller is a
fully programmable memory chips processor.
Comments
Post a Comment